htw saar QR-encoded URL
Back to Main Page Choose Module Version:
XML-Code

flag

Production and Design Technology / CAD

Module name (EN):
Name of module in study programme. It should be precise and clear.
Production and Design Technology / CAD
Degree programme:
Study Programme with validity of corresponding study regulations containing this module.
Industrial Engineering, Bachelor, ASPO 01.10.2007
Module code: WIBAS-320
SAP-Submodule-No.:
The exam administration creates a SAP-Submodule-No for every exam type in every module. The SAP-Submodule-No is equal for the same module in different study programs.
P450-0038
Hours per semester week / Teaching method:
The count of hours per week is a combination of lecture (V for German Vorlesung), exercise (U for Übung), practice (P) oder project (PA). For example a course of the form 2V+2U has 2 hours of lecture and 2 hours of exercise per week.
6V+1U+1PA (8 hours per week)
ECTS credits:
European Credit Transfer System. Points for successful completion of a course. Each ECTS point represents a workload of 30 hours.
10
Semester: 3
Mandatory course: yes
Language of instruction:
German
Assessment:
Exercises, project, written exam

[updated 30.07.2021]
Applicability / Curricular relevance:
All study programs (with year of the version of study regulations) containing the course.

WIBAS-320 (P450-0038) Industrial Engineering, Bachelor, ASPO 01.10.2007 , semester 3, mandatory course
Workload:
Workload of student for successfully completing the course. Each ECTS credit represents 30 working hours. These are the combined effort of face-to-face time, post-processing the subject of the lecture, exercises and preparation for the exam.

The total workload is distributed on the semester (01.04.-30.09. during the summer term, 01.10.-31.03. during the winter term).
120 class hours (= 90 clock hours) over a 15-week period.
The total student study time is 300 hours (equivalent to 10 ECTS credits).
There are therefore 210 hours available for class preparation and follow-up work and exam preparation.
Recommended prerequisites (modules):
None.
Recommended as prerequisite for:
WIBAS-450/550-M2e Machine tools
WIBAS-450/550-M2f
WIBAS-450/550-M6


[updated 21.03.2013]
Module coordinator:
Prof. Dr.-Ing. Dieter Arendes
Lecturer: Prof. Dr.-Ing. Dieter Arendes

[updated 03.07.2009]
Learning outcomes:
Production technology:
After successfully completing this module, students will be familiar with the most important manufacturing processes of DIN 8580, in particular their technological features (e.g. operating principles, process parameters, tool systems) and areas of application (process limits, materials, economic efficiency).
 
Design Technology / CAD:
Students will be familiar with design methodology and technology, be able to read technical drawings and be familiar with the properties and applications of important machine elements as well as the calculation of specific machine elements.
They will be able to operate the basic features of a CAD system (AutoCAD) and use it for design work.


[updated 30.07.2021]
Module content:
Production technology:
1.        Overview and classification
2.        Primary forming production processes, in particular casting
3.        Forming production processes sheet forming (bending, deep drawing, metal spinning,...) and bulk forming (extrusion, rolling, ...)
4.        Separating processes:
5.        Stamping, autogenous cutting, EDM (electrical discharge machining)
6.        Machining with geometrically defined cutting edge (turning, milling, drilling) and undefined cutting edge (grinding)
7.        Joining, soldering, pressure and fusion welding processes and bonding
 
Design Technology / CAD:
1.        Introduction, design principles and methodology
2.        Standards, tolerances and fits, surfaces
3.        Reading technical drawings
4.        Strength calculations on shafts and axles
5.        Overview of properties, areas of application and calculation bases of selected machine elements: shaft-hub connections, screws, springs
6.        Introduction to a CAD system (AutoCAD):
Basics of 2D and 3D design


[updated 30.07.2021]
Teaching methods/Media:
Production technology:
The following media will be used: Animations (FEM simulation), sample parts, script in the form of slides, as well as videos from teaching and industry.
 
Design Technology / CAD:
A CAD system will be used. Lecture notes will be available as a set of slides.


[updated 30.07.2021]
Recommended or required reading:
Production technology:
•        Koether, R./ Rau, W.: Fertigungstechnik für Wirtschaftsingenieure, Carl Hanser Verlag.
•        König, W./ Klocke F.: Fertigungsverfahren, mehrere Bände, VDI-Verlag GmbH, Düsseldorf.
•        Lange, K.: Lehrbuch der Umformtechnik, mehrere Bände, Springer Verlag.
•        Schuler Pressen GmbH: Handbuch der Umformtechnik, Springer Verlag 1996.
•        Spur, G./ Stöferle, Th.: Handbuch der Fertigungstechnik, mehrere Bände, Karl-Hanser-Verlag.
 
Design Technology / CAD:
•        Muhs, D./ Wittel, H./ Becker, M./ Jannasch, D./ Voßiek, J./ Roloff/ Matek: Maschinenelemente, Vieweg Verlag,2006.
•        Decker, K.-H-; Kabus, K.: Maschinenelemente, Hanser Fachbuchverlag, 2007.


[updated 30.07.2021]
 
[Sat Dec 28 10:52:35 CET 2024, CKEY=wi320, BKEY=wi, CID=WIBAS-320, LANGUAGE=en, DATE=28.12.2024]